A cleanroom is a specialized space controlled for particles in the environment that can impact your application, such as pollutants, contaminants, dust and microbes. It is used primarily for manufacturing, technology, military and scientific applications where contamination could be detrimental.
While establishing a controlled cleanroom climate, it’s essential to consider all aspects of the development cautiously, including the walls, floors and ceilings. Modular cleanroom walls & partitions should have the capability to keep out toxins, like airborne particles, just as permitting you to establish a climate where the wind stream, temperature and moisture are controlled.
Users have multiple choices when determining what type of cleanroom wall they will use in their hard wall cleanroom. Choices include modular wall systems and traditional stick built gyp-board walls.
When designing and planning a controlled environment such as a cleanroom, one of the most important things to think about is what materials you need for your cleanroom walls. It’s important to keep out airborne particles that may cause contamination and allow for an integrated design for control of temperature, humidity and air flow.
The HPL partition wall for cleanroom is a structure with a thickness of 45mm, made of 2 x 4 mm thick external HPL panels and internal insulation, which vary according to the project requirements.. Each panel is completely sealed on all 4 sides, using extruded aluminium profiles, designed to create the structure and complete closure of the internal insulation.
If you’re working on a technical specification for your new cleanroom design, you’ve likely noticed different types of cleanroom wall materials in the market. Unless you have experience with all the different types of cleanrooms, you might not yet know which cleanroom envelope system is suitable for your project.
Buyer beware: There is no easy way to choose which floor, wall or ceiling is best for your cleanroom. Depending on your application, sifting through products can be similar to buying a car – so many choices, not enough information.
When you need a clean room to maintain a measurably sanitary environment, you may look into building a hardwall clean room, but increasingly people are turning to Modular Clean Room walls because they can get the same controlled environment for less money and hassle. But before you invest in cleanroom wall panels, there are a few things you need to know.
Cleanrooms are controlled environments used in the manufacturing and research of pharmaceuticals or in the assembly of semiconductor and aviation applications. They are designed in a way to have a minimal level of particulate matter like microorganisms, dust, pollutants, and other molecules. The permissible level of these impurities in a room depends on the product being tested or assembled in the room. As the design and form of these cleanrooms need to be altered according to the product being tested, a lot of companies resort to modular building companies to help install a cleanroom, which is flexible in architecture while fulfilling the requirements. Here are a few factors that you need to pay attention to while deciding on a modular cleanroom structure:
If you’re working on putting together a design for your cleanroom, you’ve likely noticed that there isn’t a ton of helpful information out there. That’s because up until recently, most buyers just hired a contractor they felt they could trust, and left it at that. But if you’re here, it’s likely because you’re a part of the newer generation of buyer: the savvy, researching buyer who wants all the information before you even head to a cleanroom manufacturing pro.
 |
 |
 |
 |
 |
 |
 |
 |
 |